Rave Generation OTTX
Multiband Compressor Plugin
OTTX is a multiband dynamics processor combining aggressive upward and downward compression with per-band waveshaping.
The signal is split into three bands using 24 dB/octave Linkwitz-Riley crossovers, and each band gets independent upward compression to lift quiet detail and downward compression to control peaks.
Depth is the master intensity: at 0% the compressor is inactive, higher values increase both directions across all three bands.
Upward and Downward (0-200% each) bias the character toward expansion or limiting independently.
The Recon switch chooses how those band gains reach the audio.
Stadium splits the signal and sums it back: flat in magnitude but phase-rotated, the classic wide character.
Tight applies the same gains as shelves and never splits the audio, so there is no phase rotation, the low end stays firm, and at Mix 0% the output is bit-identical to the input. The gain decisions are the same in both; only the delivery changes.
Per-band waveshaping adds harmonic density and perceived loudness without clipping.
The Curve controls (0-100% per band) raise harmonic content while preserving the envelope, from subtle warmth to aggressive saturation. Curve Type picks the shape: Modelled for colour, Smooth for less aliasing.
Each band has its own makeup gain (-40 to +6 dB), threshold offset (0-200%) and downward ratio (0-200%). Crossovers are movable (Low/Mid 28-148 Hz, Mid/High 2000-3000 Hz). Mix (0-100%) blends dry and processed per band.
Smart Clip 0dB soft-clips then hard-limits to stop digital overs.
Comp Smooth switches detection to a 10 ms RMS average with a 6 dB soft knee. The sidechain high-pass (0-200 Hz) stops sub-bass pumping without touching the audio path.
Per-band GR meters read negative for downward compression, positive for upward expansion.
Signal flow: In Gain, three-band split, per-band compression, per-band waveshaping, sum, Out Gain, Mix, Smart Clip.
Features
- Smart Clip 0dB: soft-clipping + hard-limiting at 0 dB
- Comp Smooth: 10 ms RMS detection with 6 dB soft knee for mastering
- Two reconstruction modes (Recon): Stadium split-and-sum, or Tight phase-clean shelves
- Per-band waveshaping (Low/Mid/High Curve, 0-100%)
- Curve Type switch: Modelled for colour, Smooth for less aliasing
- 24 dB/octave Linkwitz-Riley crossover filters, flat in magnitude
- Adjustable crossover frequencies (Low/Mid: 28-148 Hz, Mid/High: 2000-3000 Hz)
- Master Depth control (0-100%) for instant compression intensity
- Independent Upward (0-200%) and Downward (0-200%) compression scaling
- Per-band makeup gain (-40 to +6 dB)
- Per-band threshold offset (0-200%)
- Per-band downward compression ratio (0-200%)
- Parallel compression Mix knob (0-100%), blended per band
- Sidechain high-pass filter (0-200 Hz) to prevent sub-bass pumping
- Per-band gain reduction meters (Low GR, Mid GR, High GR)
- Input and output gain (±24 dB)
- Global attack and release scaling (0-200%)
- 3-band upward and downward compression with independent control per band
System Requirements
- MacOS 13 Ventura and above
- Windows 10 and above (64-bit only)
- Intel, AMD, or Apple Silicon CPU
- 4GB RAM or more
Plugin Formats
VST3, AU