BLEASS Delay
Delay Plugin
Multi-Purpose Delay/Echo/Frequency Shifter
BLEASS Delay is the ideal tool for adding depth, movement and interest to your mixes.
No matter what style of music you are producing and what instrumentation you are working with, the versatility and ease-of-use of BLEASS Delay helps you achieve perfect results with the minimal of fuss.
Echoes are just the starting point for BLEASS Delay.
The integrated frequency shifter and dual filter allow deep control over the character and sound of the generated repeats, allowing you to achieve with one plugin sound effects that may otherwise require a complete plugin stack and complex routing.
BLEASS Delay also includes three LFOs, one each for the delay engine, the frequency shifter and the filter.
As well as allowing the plugin to create classic modulation effects such as chorus and flanging, the dedicated LFOs are ideal for creating exciting sound effects and epic, constantly-shifting soundscapes.
Delay Section
Sync Button
When enabled, synchronizes the delay repeats to the tempo of your DAW.
Sync/Time Fader
Controls the delay time.
When the Sync button is on, the delay time is expressed as fractions of the bar length.
When Sync is off, the delay time is expressed in terms of milliseconds.
Ping Pong
Operates in conjunction with the Stereo dial (located beneath the Ping Pong button).
When enabled, successive repeats are panned left and right.
The amount of panning, and which pan direction is used for the first repeat, is determined by the Stereo dial.
Stereo (Ping Pong)
Controls the panning width of the Ping Pong effect.
Has no impact if Ping Pong is disabled.
LFO
The delay section's LFO modulates the delay time, creating an ever-changing pattern of repeats.
The LFO dial determines the maximum magnitude of the modulation.
Rate
Sets the time it takes to complete one whole cycle of the LFO.
Stereo (LFO)
Creates a phase offset between the LFO's left and right channels, such that each channel will create differently timed repeats.
At the maximum setting of +/-180°, one channel's delay time will be reducing whilst the other channel's delay time is increasing (and vice versa).
Lower settings will create a less pronounced timing offset between left and right channels.
Shifter Section
Freq
The Shifter applies a frequency shift to the delay repeats.
The Freq slider determines the amount of frequency shift applied to each repeat.
The effect is cumulative – in other words, the frequency shift is applied each time a delayed sound is repeated.
LFO
The Shifter section's LFO modulates the amount of frequency shift that is to be applied.
The LFO dial determines the magnitude of the modulation.
RATE
Sets the time it takes to complete one whole cycle of the LFO.
Stereo
Creates a phase offset between the LFO's left and right channels, such that each channel will create different frequency shifts within the repeats.
At the maximum setting of +/-180°, one channel's frequency will be lowering whilst the other channel's frequency is being raised (and vice versa).
Lower settings will create a less pronounced frequency offset between left and right channels.
Filters Section
LP Filter
Applies a low-pass filter to the delay repeats.
Drag left-to-right in the filter graph to change the cutoff frequency; drag up-and-down to change the filter's resonance.
HP Filter
Applies a high-pass filter to the delay repeats.
Drag left-to-right in the filter graph to change the cutoff frequency; drag up-and-down to change the filter's resonance.
LFO Buttons (Filter Graphs)
The Filters section's LFO can only be applied to one of the filters at a time.
Click the LFO button above a filter graph to assign the LFO to that filter.
LFO
The Filters section's LFO modulates the cutoff frequency of the filter to which the LFO is assigned.
The LFO dial determines the magnitude of the modulation.
Rate
Sets the time it takes to complete one whole cycle of the LFO.
Stereo
Creates a phase offset between the LFO's left and right channels, such that each channel will be filtered at a different cutoff frequency.
At the maximum setting of +/-180°, one channel's cutoff frequency will be rising whilst the other channel's cutoff is reducing (and vice versa).
Lower settings will create a less pronounced offset in the cutoff frequencies.
Mix Section
Feedback
Sets the volume level of the signal that is fed back to the Delay section.
Lower settings result in fewer repeats; higher settings produce more repeats.
At 100%, repeats will continue indefinitely.
Dry/Wet
Sets the balance between the direct unprocessed signal and the processed signal.
System Requirements
- MacOS 10.15 Catalina and above
- Windows 10 and above (64-bit only)
- Intel, AMD, or Apple Silicon CPU
Plugin Formats
AAX Native, AU, and VST3